Backwoods Adventure Mods Mercedes Sprinter (2007+) DRIFTR Ladder
Why Shop With Us?
✓Authorized Dealer for Backwoods Adventure Mods: GUARANTEED the full Manufacturers Warranty
✓Speak With An Expert Today: Text or Call +1(833)322-6289 For Help!
✓No Sales Tax: Sales Tax only applied to New York Residents
✓Shipping & Handling Time: Shipping is FREE for most orders over $499.
✓0% APR Financing Available: Backwoods Adventure Mods + 0% APR, Applicable at Checkout
Backwoods Adventure Mods Ladder for Mercedes Sprinter (2007+) DRIFTR Roof Rack
The Mercedes Sprinter 2014 DRIFTR ladder is the ideal companion to your new DRIFTR roof rack. This ladder bolts directly to the rack for a secure fit, and the steps are wider and deeper than any other ladder on the market, making it easier for you to climb up and down while carrying your gear. The ends of every step have added notches to provide extra traction in muddy or wet conditions.
Easily assemble and install the Mercedes Sprinter DRIFTR ladder. Choose a location on the side of the van opposite the door. Mark the holes at the top of the ladder and underneath the van. Ensure the ladder is straight, level, and aesthetically pleasing before proceeding.
Attach the ladder using bolts on the top and bottom and adjust distance from the van. Ensure bolts are secured for use with Mercedes Springer High Roof Vans (144, 170, and 170 EXT, 2014+).
For use with the Backwoods Adventure Mods Mercedes Sprinter & Sprinter Revel (2007+) DRIFTR Roof Rack
Installation Guide
How to Mount:
Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld. These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the DRIFTR rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!
Compatible With 2014-current Mercedes Sprinter High Roof vans in 144, 170, and 170 EXT lengths.
WARNING: Some of the products listed contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. None of our products are intended to be used in conjunction with clean drinking water unless stated otherwise. For more info please visit www.p65warnings.ca.gov or contact the Backwoods Adventure Mods sales team.
***THIS PRODUCT IS MADE FOR OFFROAD USE ONLY***